X-18s™ | 10 High-Current Relay Expansion Module
The X-18s expansion module has 10 high-current relays which can be controlled using an X-400 or X-600M controller
The X-18s™ expansion module is used with an X-400 or X-600M controller. The X-18s has ten, high-current relays, each with Form-C contacts (SPDT). Wiring connections are made directly to the relays using 1/4″ tab terminals located on top of the relays.
This module is suitable for use with loads which require line voltages and high currents such as pumps, motors, lights and heaters. Attach multiple X-18s modules or a combination of expansion modules to the X-400 or X-600M for an I/O combination that is tailored to your specific needs.
Other expansion modules with different I/O combinations are also available.
X-18s Part Number
| PART NUMBER | OUTPUTS | INPUTS | POWER SUPPLY |
| X-18s | Relays: 10 (277VAC, 30VDC, 30A) | N/A | 9-28 VDC (24V recommended) |
Features
- 10 Isolated relays (SPDT)
- Relay Functions:
- On
- Off
- Pulse
- Relay Connectors: 1/4 inch tab connectors
- Great for heavy-load applications including:
- Motors
- Solenoid valves
- Lights
- and much more…
- 11 LEDs for relays and power
- Power Supply: 9-28 VDC (24V recommended)
Power Requirements
- Voltage: 9-28 VDC (24V recommended)*
- Max Current: See table below for typical values at 25°C.
| Power Supply | All Relays OFF | All Relays ON |
|---|---|---|
| 9 VDC | 18 mA | 1200 mA |
| 12 VDC | 14 mA | 880 mA |
| 24 VDC | 11 mA | 450 mA |
Relay Contacts
- Number of Relays: 10
- Max Voltage: 277VAC, 30VDC
- Max Current: 30A
- Contact Type: SPDT
- Load Type: General Purpose
- Contact Resistance: < 30 milliohms initial
- Contact Material: AgSnO2
- Electrical Life: 100K cycles (Typical)
- Mechanical Life: 10M cycles (Typical)
- Environmental Rating: Over voltage Category II, Pollution Degree 2
- Relay Modes: ON/OFF or Pulse
- Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Connectors
- Expansion Connector: Ribbon cable, 2×5-position, polarized 0.100″ pitch
- Relays: 1/4″ tab connectors
LED Indicators
- Number of LEDs: 11
- Power on
- Relays 1-10
Physical
- Size:
- 8.60in (218.44mm) wide
- 4.95in (125.73mm) tall
- 2.46in (62.48mm) deep
- Weight: 20 oz (566 g)
- Enclosure Material: PVC
- Enclosure Flame Rating: UL94 V1
Environmental
- Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
- Storage Temperature: -40°F to 185°F (-40°C to 85°C)
- Humidity: 5-95%, non-condensing
- Altitude: Up to 2,000m
- Indoor use or NEMA-4 protected location
Electromagnetic Compliance
- IEC CISPR 22, CISPR 24
- FCC 47CFR15 (Class B)
- EN55024 ITE Immunity (2010)
- EN55022 Emissions (2010)
Product Safety Compliance
- UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)
Users Manuals
X-18s Users Manual (PDF) (Rev: 1.0. 3.0 MB)